Industrial Oven Manufacturer in India

Industrial Oven

  • Home
  • Industrial Oven

Industrial Oven General Specifaction

CONSTRUCTION: M.S.ANGLE FRAME

Oven will be manufactured from M.S. Angle Frame or From S.S.Angle Frame as per party Requirement

  • Angle Size: 40 mm X 40 mm X 5 mm ( Small Size Oven)
  • Angle Size: 50 mm X 50 mm X 5 mm ( Big Size Oven)
  • 18 Swg. for Temp. up to 250 Deg.c
  • 16 Swg. for Temp. up to for temperatures up to 450 Deg.c The interior may be made of S.S. for 304 or S.S. 331 / S.S 310
DOOR :

Ovens will be accommodated with Single or Double doors depend on inner working size. Doors will be mounted on sturdy hinges & are fitted with an arrangement for latches. Hand operated or mechanically operated vertical lifting door can be installed as per party requirement.

INSULATION :

Ceramic Wool / Ceramic Blanket & Ceramic Board is offered in accordance with the working temperature.

HEATING :
Electric / Gas Fired / LPG Fired

We use Coil Type Heater from 50 upto 150 Deg.c & after that we use U-Type Heaters upto 50 To 250 Deg.c & after that we use Refactory Type Heaters upto 50 To 450 Deg.c & above….

Heaters will be Located on both side of the wall….

AIR CIRCULATION :

Top Air Circulation / Back Air Circulation & Side Air Circulation

Top Air Circulation: Fan & Blowers are placed on the topside of the Oven & air is distributed on both side & air will be Suck for the Center of the Oven & due to that uniformity is found all side of the Oven.

Back Air Circulation: Fan & Blowers are placed on the backside of the Oven & air is distributed on both side & air will be Suck for the Center of the Oven & due to that uniformity is found all side of the Oven.

Side Air Circulation: Fan & Blowers are placed on the side of the Oven & air is distributed on both side & air will be Suck for the Center of the Oven & due to that uniformity is found all side of the Oven.

TEMPERATURE CONTROLLER :

The temperature within the oven is regulated by PLC / PID / SSR / Thyristor & Contactor Base Depending on the application.

ACCESSORIES :

Data Logger / PLC / HMI / PID & Data Logger with Software

DOOR LOCKING:

Special locking system is provided for Door Lock.

TRAYS / TROLLIES :

Platform type Trolley, Tray Type; Fixed Type Tray Arrangement will be provided as per requirement.

PAINT :

We use Heat resistant silver Alluminium paint upto 650 Deg.c inside the Oven & outside nickel grey; Hammer Tone; Plain Colour or any simple colour as per party requirement.


KHODIYAR MODELS

Khodiyar Industries is one of the best Industrial Oven manufacturers, Exporter, in India.

TEMPERATURE RANGES :

50 TO 150 DEG.C, 50 TO 250 DEG.C; 50 TO 450 DEG.C, 50 TO 650 DEG.C


MODEL NO. INNER SIZE
Height Width Depth
KI/ 03 450MM 450MM 450MM
KI/ 08 600MM 600MM 600MM
KI/ 12 900MM 600MM 600MM
KI/ 16 1200MM 600MM 600MM
KI/ 27 900MM 900MM 900MM
KI/ 36 1200MM 900MM 900MM
KI/45 1500MM 900MM 900MM
KI/64 1200MM 1200MM 1200MM
KI/80 1500MM 1200MM 1200MM
KI/ 96 1800MM 1200MM 1200MM
KI/ 125 1500MM 1500MM 1500MM
KI/ 150 1800MM 1500MM 1500MM
KI/ 216 1800MM 1800MM 1800MM
KI/ 252 2100MM 1800MM 1800MM
KI/ 343 2100MM 2100MM 2100MM
Flux Baking & Drying Oven
Industrial Oven
Flux Baking & Drying Oven
Industrial Oven
Industrial Oven with PLC & HMI Control Panel
Industrial Oven with PLC & HMI Control Panel